English
 |
KCB83.3
HOFFWELL
84136029
| Quantity: | |
|---|---|
| Application: | It applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fibers at temperature below 300ºC and with the vicosity of 5-1500cSt. It applies to hydraulic system, too. |
| Application Scope | It can give performance as tranfersfer pump or booster pump in oil delivery,pressurization and injection in fuel supply system. It can be also applied as hydraulic pump supplying hydraulic power in hydraulic system and in all industry field as lubricating pump. |
| Structure Features | KCB series gear pumps are mainly composed of gears, axles, pump body, pump cover, bearing sleeves and axle-end seal, ect. The gears are adopt double cicrular teeth shape, which makes the gears less wear on gear surface, stable revolution,low noise,long service life and high efficiency, due to no sliding in the teeth during gear fallingin. This kind of pump has got rid of trandition designin and come into a new decade in designing and application. The pump is designed with safety valve for peotection against overload. The full return flow pressure is 1.5 times higher than the rated exhaust pressure of the pump. It can be adjusted within the allowance of exhaust pressure range according to circumstance. But please note safety valve can't be applied as pressure-reducing valve for long time. You may install pressure-reducing valve separately om pipe-line if needed. There are two kinds of axle-end seala, mechanical seal and packing seal, which can be chosen according to the clients'requirement or application circumstance. The direction of rotatiom is clockwise viewed from coupling end. |
>>>KCB83.3 external gear pump specifications
| Flow | 83.3L/min |
| Different Pressure | 0.33Mpa |
| Inlet/Outlet | 25 |
| Motor | Y100L1-4 |
| Speed | 1420r/min |
| Power | 2.2KW |
| Packing Detail | Export standard wooden case |
>>>Other KCB external gear pump models with detail informations
Model | Capacity Q | Speed r/min | Exhaust Pressure Mpa | (NPSH)r m | Efficiency η % | Motor | ||
| m 3 /h | L/min | Power kw | Model | |||||
| KCB-18.3 | 1.1 | 18.3 | 1400 | 1.45 | 5 | 44 | 1.5 | Y90L-4 |
| 2CY-1.1/1.45 | ||||||||
| KCB-33.3 | 2 | 33.3 | 1420 | 1.45 | 5 | 44 | 2.2 | Y100L1-4 |
| 2CY-2/1.45 | ||||||||
| KCB-55 | 3.3 | 55 | 1400 | 0.33 | 7 | 41 | 1.5 | Y90L-4 |
| 2CY-3.3/0.33 | ||||||||
| KCB-83.3 | 5 | 83.3 | 1420 | 0.33 | 7 | 43 | 2.2 | Y100L1-4 |
| 2CY-5/0.33 | ||||||||
| KCB-135 | 8 | 135 | 940 | 0.33 | 5 | 46 | 2.2 | Y112M-6 |
| 2CY-8/0.33 | ||||||||
| KCB-200 | 12 | 200 | 1440 | 0.33 | 5 | 46 | 4 | Y112M-4 |
| 2CY-12/0.33 | ||||||||
| KCB-300 | 18 | 300 | 960 | 0.36 | 5 | 42 | 5.5 | Y132M2-6 |
| 2CY-18/0.36 | ||||||||
| KCB-483.3 | 29 | 483.3 | 1440 | 0.36 | 5.5 | 42 | 11 | Y160M-4 |
| 2CY-29/0.36 | ||||||||
| KCB-633 | 38 | 633 | 970 | 0.28 | 6 | 43 | 11 | Y160L-6 |
| 2CY-38/0.28 | ||||||||
| KCB-960 | 58 | 960 | 1470 | 0.28 | 6.5 | 43 | 18.5 | Y180M-4 |
| 2CY-58/0.28 | ||||||||
| KCB-1200 | 72 | 1200 | 740 | 0.6 | 7 | 43 | 37 | Y280S-8 |
| KCB-1600 | 95 | 1600 | 980 | 45 | Y280S-6 | |||
| KCB-1800 | 112 | 1800 | 740 | 0.6 | 7.5 | 43 | 55 | Y315S-8 |
| KCB-2500 | 150 | 2500 | 985 | 75 | Y315S-6 | |||
| KCB-2850 | 170 | 2850 | 740 | 0.6 | 8 | 44 | 90 | Y315L1-8 |
| KCB-3800 | 230 | 3800 | 989 | 110 | Y315L1-6 | |||
| KCB-4100 | 245 | 4100 | 743 | 0.6 | 8 | 44 | 132 | Y355M1-8 |
| KCB-5400 | 325 | 5400 | 989 | 160 | Y355M1-6 | |||
| KCB-5600 | 330 | 5600 | 744 | 0.6 | 8 | 44 | 160 | Y355M2-8 |
| KCB-7600 | 460 | 7600 | 989 | 200 | Y355M3-6 | |||
| KCB-7000 | 420 | 7000 | 744 | 0.6 | 8 | 44 | 185 | Y355L1-8 |
| KCB-9600 | 570 | 9600 | 989 | 250 | Y355L2-6 | |||
>>>FAQ--- Frequently Asked Question
1. How to get our quotation in time, please answer following questions:
A.What liquid do you transfer? Oil, Water, Food or Corrosive Chemical liquid, with solid particle or not, and so on~
B. What's the flow or capcity (m3/h, L/m)?
C.What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
D. Contact us to get the quotation:
2. OEM: Ok
3. MOQ: 1set
4. Package: Standar export Plywood Case or Styrofoam with Carton
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Term of payment: T/T, Aliexpress, L/C, Westunion
8. Why choose us: more than 30 years experiences manufacturer
Good quality with competitive pirce
ISO2000, CE certificate, CCS certificate
Professional after-sales service
| Application: | It applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fibers at temperature below 300ºC and with the vicosity of 5-1500cSt. It applies to hydraulic system, too. |
| Application Scope | It can give performance as tranfersfer pump or booster pump in oil delivery,pressurization and injection in fuel supply system. It can be also applied as hydraulic pump supplying hydraulic power in hydraulic system and in all industry field as lubricating pump. |
| Structure Features | KCB series gear pumps are mainly composed of gears, axles, pump body, pump cover, bearing sleeves and axle-end seal, ect. The gears are adopt double cicrular teeth shape, which makes the gears less wear on gear surface, stable revolution,low noise,long service life and high efficiency, due to no sliding in the teeth during gear fallingin. This kind of pump has got rid of trandition designin and come into a new decade in designing and application. The pump is designed with safety valve for peotection against overload. The full return flow pressure is 1.5 times higher than the rated exhaust pressure of the pump. It can be adjusted within the allowance of exhaust pressure range according to circumstance. But please note safety valve can't be applied as pressure-reducing valve for long time. You may install pressure-reducing valve separately om pipe-line if needed. There are two kinds of axle-end seala, mechanical seal and packing seal, which can be chosen according to the clients'requirement or application circumstance. The direction of rotatiom is clockwise viewed from coupling end. |
>>>KCB83.3 external gear pump specifications
| Flow | 83.3L/min |
| Different Pressure | 0.33Mpa |
| Inlet/Outlet | 25 |
| Motor | Y100L1-4 |
| Speed | 1420r/min |
| Power | 2.2KW |
| Packing Detail | Export standard wooden case |
>>>Other KCB external gear pump models with detail informations
Model | Capacity Q | Speed r/min | Exhaust Pressure Mpa | (NPSH)r m | Efficiency η % | Motor | ||
| m 3 /h | L/min | Power kw | Model | |||||
| KCB-18.3 | 1.1 | 18.3 | 1400 | 1.45 | 5 | 44 | 1.5 | Y90L-4 |
| 2CY-1.1/1.45 | ||||||||
| KCB-33.3 | 2 | 33.3 | 1420 | 1.45 | 5 | 44 | 2.2 | Y100L1-4 |
| 2CY-2/1.45 | ||||||||
| KCB-55 | 3.3 | 55 | 1400 | 0.33 | 7 | 41 | 1.5 | Y90L-4 |
| 2CY-3.3/0.33 | ||||||||
| KCB-83.3 | 5 | 83.3 | 1420 | 0.33 | 7 | 43 | 2.2 | Y100L1-4 |
| 2CY-5/0.33 | ||||||||
| KCB-135 | 8 | 135 | 940 | 0.33 | 5 | 46 | 2.2 | Y112M-6 |
| 2CY-8/0.33 | ||||||||
| KCB-200 | 12 | 200 | 1440 | 0.33 | 5 | 46 | 4 | Y112M-4 |
| 2CY-12/0.33 | ||||||||
| KCB-300 | 18 | 300 | 960 | 0.36 | 5 | 42 | 5.5 | Y132M2-6 |
| 2CY-18/0.36 | ||||||||
| KCB-483.3 | 29 | 483.3 | 1440 | 0.36 | 5.5 | 42 | 11 | Y160M-4 |
| 2CY-29/0.36 | ||||||||
| KCB-633 | 38 | 633 | 970 | 0.28 | 6 | 43 | 11 | Y160L-6 |
| 2CY-38/0.28 | ||||||||
| KCB-960 | 58 | 960 | 1470 | 0.28 | 6.5 | 43 | 18.5 | Y180M-4 |
| 2CY-58/0.28 | ||||||||
| KCB-1200 | 72 | 1200 | 740 | 0.6 | 7 | 43 | 37 | Y280S-8 |
| KCB-1600 | 95 | 1600 | 980 | 45 | Y280S-6 | |||
| KCB-1800 | 112 | 1800 | 740 | 0.6 | 7.5 | 43 | 55 | Y315S-8 |
| KCB-2500 | 150 | 2500 | 985 | 75 | Y315S-6 | |||
| KCB-2850 | 170 | 2850 | 740 | 0.6 | 8 | 44 | 90 | Y315L1-8 |
| KCB-3800 | 230 | 3800 | 989 | 110 | Y315L1-6 | |||
| KCB-4100 | 245 | 4100 | 743 | 0.6 | 8 | 44 | 132 | Y355M1-8 |
| KCB-5400 | 325 | 5400 | 989 | 160 | Y355M1-6 | |||
| KCB-5600 | 330 | 5600 | 744 | 0.6 | 8 | 44 | 160 | Y355M2-8 |
| KCB-7600 | 460 | 7600 | 989 | 200 | Y355M3-6 | |||
| KCB-7000 | 420 | 7000 | 744 | 0.6 | 8 | 44 | 185 | Y355L1-8 |
| KCB-9600 | 570 | 9600 | 989 | 250 | Y355L2-6 | |||
>>>FAQ--- Frequently Asked Question
1. How to get our quotation in time, please answer following questions:
A.What liquid do you transfer? Oil, Water, Food or Corrosive Chemical liquid, with solid particle or not, and so on~
B. What's the flow or capcity (m3/h, L/m)?
C.What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
D. Contact us to get the quotation:
2. OEM: Ok
3. MOQ: 1set
4. Package: Standar export Plywood Case or Styrofoam with Carton
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Term of payment: T/T, Aliexpress, L/C, Westunion
8. Why choose us: more than 30 years experiences manufacturer
Good quality with competitive pirce
ISO2000, CE certificate, CCS certificate
Professional after-sales service
