Cast Iron Gear Oil Pump (KCB-300)

Application:
  It applies to delivering non-corrosive lubricating-oil or equivalent liquid without  soild particles and fibres at temperature below300ºC and with  the viscosity of 5x10¯6~5x10¯⊃3;m⊃2;/s(5-1500cSt). It applies to hydraulic system, too.
  Reducing the speed, the pump can delivery the liquid that viscosity can be up to 5x10⊃3;cSt.

Application Scope:
  It can give performance as transfer pump or booster pump in oil delivery system, and fuel pump for delivery,pressurization and injection in fuel supply system. It can be also applied as hydraulic pump supplying hydraulic power in hydraulic system and in all industry fields as lubricating pump.

Structure Features
  KCB series gear pumps are mainly composed of gears, axles, pump body, pump cover, bearing sleeves and axle-end seal,ect. The gear are adopt double circular teeth shape, which makes the gears less wear on gear surface,stable revolution, low noise, long service life and high efficiency, due to no sliding on the teeth during gear fallingin This kind of pump has got rid of traditional design and come into a new decade in designing and application.
  The pump is designed with safety valve for protection against overload. The full return flow pressure is 1.5 times higher than the rated exhaust pressure of the pump. It can be adjusred within the allowance of exhaust pressure range according to circumstance. But please note safety valve can't be applied as pressure-reducing valve for long time. You may install pressure-reducing valve separately on pipe-line if needed.
  There are two kinds of axle-end seals,mechanical seal and packing deal, which can be chosen according to the clients' requirement or application circumstance.
  The direction of rotation is clockwise viewed from coupling end.