English
 |
2CY12/2.5
HOFFWELL
84136029
| Quantity: | |
|---|---|
Applacation
It applies to delivering non-corrosive luricating-oil, fuel oil, light oil, diesel oil, crude oil, palm oil or equivalent liquid without solid particles and fibres at temperature below 80 deg C with the viscosity of 5-1500cSt.It applies to hydraulic system,too.
Applacation Scope
It can give performance as transferpump or booster pump in oil delivery system,and a fuel pump for delivery,pressurization and injection in fuel supply system .It can be also applied as hydraulic pump supplying hydraulic power in hydraulic system and in all industry fields as lubricating pump.
Structure Features
2CY series gear pumps are mainly composed of gears,axles,pump body ,pump cap,bearing sleeves and axle-end seals,etc.The nitriding-treated gears have the advantage of higher hardness and wear property,and they rotate with the axles inside the replaceable bearing sleeves.All of pump's parts can be lubricated by delivered medium when working.
Four bearing sleeves are installed suspended in pump body and can be automtically adjusted with facing gaps clearance complying with pressure change,therefore,it results in stable pump pressure,little discharge ,flow pulsation and higher volume efficiency .
2CY12/2.5 external gear pump specifications
| Model | Capacity | Head | Speed | NPSH r | Power | Efficiency | Dia of inlet | Dia of outlet | Delivery time |
| 2CY12/2.5 | 12m3/h | 25bar | 1450rpm | 9.5m | 15KW | 61% | 2 inch | 2 inch | within 10 days |
Material: pump body is cast iron, gear is 40Cr, shaft is 45# steel, mechanical seal. Packing diemsnion for bare shaft pump: 420mm X 300mm X 410mm Weight of the pump only: 54kgs. | |||||||||
2CY Other Model Performance Parameters
| Model | Capacity Q | Speed r/min | Exhaust Pressure Mpa | (NPSH)r m | Efficiency η % | Motor | ||
| m3/h | L/min | Power kw | Model | |||||
| 2CY-1.08/2.5 | 1.08 | 18 | 1420 | 2.5 | 9.5 | 58 | 2.2 | Y100L1-4 |
| 2CY-2.1/2.5 | 2.1 | 35 | 1420 | 2.5 | 9.5 | 58 | 3 | Y100L2-4 |
| 2CY-3/2.5 | 3 | 50 | 1440 | 2.5 | 9.5 | 59 | 4 | Y112M-4 |
| 2CY-4.2/2.5 | 4.2 | 70 | 1440 | 2.5 | 9.5 | 59 | 5.5 | Y132S-4 |
| 2CY-7.5/2.5 | 7.5 | 125 | 1440 | 2.5 | 9.5 | 63 | 7.5 | Y132M-4 |
| 2CY-12/2.5 | 12 | 200 | 1460 | 2.5 | 9.5 | 63 | 15 | Y160L-4 |
>>>FAQ--- Frequently Asked Question
1. How to get our quotation in time, please answer following questions:
A.What liquid do you transfer? Oil, Water, Food or Corrosive Chemical liquid, with solid particle or not, and so on~
B. What's the flow or capcity
(m3/h, L/m)?
C.What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
D. Contact us to get the quotation:
2. OEM: Ok
3. MOQ: 1set
4. Package: Standar export Plywood Case or Styrofoam with Carton
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Term of payment: 100% T/T, Aliexpress, L/C, Westunion
8. Why choose us: more than 20 years experiences manufacturer
Good quality with competitive pirce
ISO2000, CE certificate, CCS certificate
Professional after-sales service
Applacation
It applies to delivering non-corrosive luricating-oil, fuel oil, light oil, diesel oil, crude oil, palm oil or equivalent liquid without solid particles and fibres at temperature below 80 deg C with the viscosity of 5-1500cSt.It applies to hydraulic system,too.
Applacation Scope
It can give performance as transferpump or booster pump in oil delivery system,and a fuel pump for delivery,pressurization and injection in fuel supply system .It can be also applied as hydraulic pump supplying hydraulic power in hydraulic system and in all industry fields as lubricating pump.
Structure Features
2CY series gear pumps are mainly composed of gears,axles,pump body ,pump cap,bearing sleeves and axle-end seals,etc.The nitriding-treated gears have the advantage of higher hardness and wear property,and they rotate with the axles inside the replaceable bearing sleeves.All of pump's parts can be lubricated by delivered medium when working.
Four bearing sleeves are installed suspended in pump body and can be automtically adjusted with facing gaps clearance complying with pressure change,therefore,it results in stable pump pressure,little discharge ,flow pulsation and higher volume efficiency .
2CY12/2.5 external gear pump specifications
| Model | Capacity | Head | Speed | NPSH r | Power | Efficiency | Dia of inlet | Dia of outlet | Delivery time |
| 2CY12/2.5 | 12m3/h | 25bar | 1450rpm | 9.5m | 15KW | 61% | 2 inch | 2 inch | within 10 days |
Material: pump body is cast iron, gear is 40Cr, shaft is 45# steel, mechanical seal. Packing diemsnion for bare shaft pump: 420mm X 300mm X 410mm Weight of the pump only: 54kgs. | |||||||||
2CY Other Model Performance Parameters
| Model | Capacity Q | Speed r/min | Exhaust Pressure Mpa | (NPSH)r m | Efficiency η % | Motor | ||
| m3/h | L/min | Power kw | Model | |||||
| 2CY-1.08/2.5 | 1.08 | 18 | 1420 | 2.5 | 9.5 | 58 | 2.2 | Y100L1-4 |
| 2CY-2.1/2.5 | 2.1 | 35 | 1420 | 2.5 | 9.5 | 58 | 3 | Y100L2-4 |
| 2CY-3/2.5 | 3 | 50 | 1440 | 2.5 | 9.5 | 59 | 4 | Y112M-4 |
| 2CY-4.2/2.5 | 4.2 | 70 | 1440 | 2.5 | 9.5 | 59 | 5.5 | Y132S-4 |
| 2CY-7.5/2.5 | 7.5 | 125 | 1440 | 2.5 | 9.5 | 63 | 7.5 | Y132M-4 |
| 2CY-12/2.5 | 12 | 200 | 1460 | 2.5 | 9.5 | 63 | 15 | Y160L-4 |
>>>FAQ--- Frequently Asked Question
1. How to get our quotation in time, please answer following questions:
A.What liquid do you transfer? Oil, Water, Food or Corrosive Chemical liquid, with solid particle or not, and so on~
B. What's the flow or capcity
(m3/h, L/m)?
C.What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
D. Contact us to get the quotation:
2. OEM: Ok
3. MOQ: 1set
4. Package: Standar export Plywood Case or Styrofoam with Carton
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Term of payment: 100% T/T, Aliexpress, L/C, Westunion
8. Why choose us: more than 20 years experiences manufacturer
Good quality with competitive pirce
ISO2000, CE certificate, CCS certificate
Professional after-sales service
