  +86-317-5200604     hoffwellpump@gmail.com
EnglishEnglish
banner
You are here: Home » Products » In-line Pump » CE Approved NYP Asphalt Gear Pump

loading

Share to:
sharethis sharing button

CE Approved NYP Asphalt Gear Pump

  • Model NO.: NYP7.0A
  • Tooth Flank: Straight Tooth
  • Power: Electric
  • Applications: Transfer Pump
  • Pump Body Material: Cast Iron Ht200
  • Shaft Material: 45# Steel
  • Safety Valve: Can Add The Safety Valve
  • Specification: CE SGS
  • HS Code: 8413602990
  • Mesh Form: Internal Engaged
  • Tooth Curve: Cycloid
  • Type: Internal Gear Pump
  • Certification: CE, ISO
  • Gear Material: 40cr
  • Seal: Packing Seal or Mechanical Seal
  • Trademark: HOFFWELL
  • Origin: Cn
Quantity:
>>> Brief introduction 

NYP series internal gear pump is a kind of new positive displacement pump, and is designed according to the different fields requirements of petroleum, chemical insustry, paint, medicine, foodstuff and so on. It widely applies to a variety of mediums with different property and viscosity because of special structure and selected different pump's materials. 
Proper medium temperature: -10. C-200. C 
Proper medium viscosity: 1.0cst-300, 000cst 


>>> structure 

(1)working principle 
Driving gear (outside rotor) with internal tooth drives the internal rotor and turns in same direction in the full closed pump body. The pump casting and crescent of the front cover separate the inlet from the outlet. When it turns, negative pressure formed at the suction port, the liquid inhaled and being taken to the outlet by rotor, then the liquid is expelled from the discharge port as the gears mesh. The transportation of the liquid finished 
(2)Structure Feature 
Component: Internal rotor, outside rotor, shaft, pump body, front cover, seal, bearing etc. 
The seal of pump adopts packing seal or mechanical seal. When the delivered medium is high temperature, high viscosity or strong corrosion, packing seal should be adopted. 
When the delivered medium is easy crystalline materials, we can design the heat preservation jacket in pump body and front cover in order to melt the medium with steam when working, the pump can be also fitted with the safety valve. 
The pump set is composed of the pump, motor and base plate, the direction way is belt wheel driving or coupling driving. 
The rotation direction is clockwise from motor end. 


>>> Advantage 

(1)steady delivery without pulsation, little vibration and low noise 
(2)outstanding self-priming ability 
(3)the pump can deliver the varied corrosion medium if the pump parts selected proper materials. In addition the working temperature can reach max 200. C
(4). The same rotary direction of internal rotor and outside rotor results in little wear and long operation life.
(5). The pump's flow can be changed through adjusting the speed.
(6). It's specially suited to deliver high viscosity medium.


>>> Model explanation

NYP means internal gear pump
7.0 means displacement L/100r
A means code of design improvement


>>>Other models:

Model      Path mm Displacement
theory
L/100rev
Viscosity
cSt
Speed
r/min
Pressure(MPa) Connections
0.4 0.6 0.8 1.0
Shaft power(kw)Capacity(L/min)
NYP0.78 15 0.78 20 1390 0.17/9.3 0.23/9.0 0.28/8.8 0.32/8.6 G1/2"
60 1390 0.18/9.5 0.24/9.2 0.28/9.0 0.33/8.9
200 1390 0.31/10.4 0.35/10.2 0.39/10.0 0.43/9.9
600 1390 0.39/10.4 0.44/10.3 0.48/10.3 0.52/10.2
2000 910 0.23/6.8 0.27/6.8 0.30/6.8 0.33/6.7
6000 720 0.24/5.4 0.31/6.1 0.30/6.8  
NYP2.3 25 2.3 20 1400 0.38/28.4 0.49/27.5     G1"
60 1400 0.59/29.2 0.65/28.8    
200 1400 0.61/30.0 0.72/29.6    
600 1400 0.92/31.9 0.96/31.7    
2000 910 0.61/19.9 0.68/19.7    
6000 720 0.77/16.32 0.83/16.2    
NYP3.6 40 3.6 20 1450 0.69/46.7 0.94/45.9 1.18/45 1.44/43.4
Flange
60 1450 0.81/47.5 1.09/46.7 1.37/45.9 1.57/44.7
200 1450 1.06/49.7 1.31/49.2 1.56/48.8 1.79/47.3
600 1450 1.45/49.9 1.61/49.6 1.77/49.3 1.93/49
2000 960 1.28/34.3 1.41/33.8 1.54/33.7 1.65/33.6
6000 640 1.08/23.0 1.18/22.9 1.28/22.9 1.37/22.8
20000 583 1.22/20.5 1.24/20.4 1.25/20.4 1.38/20.3
60000 455 0.84/16.3 0.91/16.2 0.98/16.1 1.01/16
NYP7.0
NYP7.0A
(The 
original 
Model :
NYP3
NYP3A)
40 7.0 20 1450 1.36/98.1 1.8/96 2.0/94.7 2.4/93
Thread
60 1450 1.45/99 1.9/97 2.2/96.4 2.6/95
200 1450 1.62/99.8 2.0/98 2.3/97.5 2.7/97
600 960 1.4/62 1.6/65 1.8/44 2.0/64
2000 960 1.8/67 2.0/66 2.3/65 2.6/65
6000 640 1.5/44.5 1.7/44 1.8/44 2.0/44
20000 583 1.6/40.5 1.9/40 2.1/40 2.2/40
60000 455 1.46/31.5 1.8/31 1.9/31 2.0/31

CE Approved NYP Asphalt Gear Pump
CE Approved NYP Asphalt Gear Pump
Previous: 
Next: 

Product Category

Get a Free Quote

Related News

content is empty!

Contact Us
ADD : Yihe Plaza, West Jiefang Road, Cangzhou City, Hebei Province, China
TEL: +86-317-5200604 / +86-18633712388
QQ : 85497668
            hoffwellpump@gmail.com
            vivianzhangpump@gmail.com

Quick Links

Copyright 2017@Hebei Hoffwell Industrial Pump Co., Ltd. All Rights Reserved.