3G Three Screw Diesel Transfer Pump
Product Description
>>>Product Features:
1. Good self-priming and suction performance
2. Wide medium range, including liquid with slight lubricity
3. Minimal flow pulse, state operation and small vibration and noise.
4. No shear or damage of the conveyed medium, so the conveyed medium is not easy to be aging.
5. High efficiency, energy saving, high reliability.
6. Long service life, simple maintenance and low cost.
>>> Conveying Medium:
1. Clean lubricating liquid, such as lubricant, mineral oil, synthetic hydraulic fluid, natural oil, etc.
2. Medium with worse lubricating property, such as light fuel oil, heavy fuel oil, cool tar, asphalt, viscose, emulsified mixture, etc.
>>> Example of pump model:
Eg:3G25×4-46
3G:three screw pump
25:out-side dizmeter of the driving screw 25mm
4:potch number of the screw
46:46° pitch angle of the screw
R:hezvy fuel oil
r:light fuel oil
W:high temperature heated oil
N:high visc oil
A:code of design improvement
S:double suction
>>>According to the application modes three screw pump is divided into five series
1. Good self-priming and suction performance
2. Wide medium range, including liquid with slight lubricity
3. Minimal flow pulse, state operation and small vibration and noise.
4. No shear or damage of the conveyed medium, so the conveyed medium is not easy to be aging.
5. High efficiency, energy saving, high reliability.
6. Long service life, simple maintenance and low cost.
>>> Conveying Medium:
1. Clean lubricating liquid, such as lubricant, mineral oil, synthetic hydraulic fluid, natural oil, etc.
2. Medium with worse lubricating property, such as light fuel oil, heavy fuel oil, cool tar, asphalt, viscose, emulsified mixture, etc.
>>> Example of pump model:
Eg:3G25×4-46
3G:three screw pump
25:out-side dizmeter of the driving screw 25mm
4:potch number of the screw
46:46° pitch angle of the screw
R:hezvy fuel oil
r:light fuel oil
W:high temperature heated oil
N:high visc oil
A:code of design improvement
S:double suction
>>>According to the application modes three screw pump is divided into five series
| Series | Main application | Performancescope | |
| Capacity m3/h | Pre MPa | ||
| 3G | Lub oil visc3-20oE;temp≤80ºC | 0.6-570 | 2.5 |
| 3GR | Heavy feul lil visc3-50oE;temp≤120ºC | 0.6-570 | 2.5 |
| 3GR | Light feul oil visc1.2-5oE;temp≤120ºC | 0.6-570 | 1.6 |
| 3GW | High temp feul heated oil;temp≤150ºC | 0.6-363 | 1.6 |
| 3GN | High visc oil 100oE;temp≤80ºC | 0.6-636 | 2.5 |
>>>Performance Parameters
| Model | Exhaust Pressure MPa | Capacity Q | Speed r/min | (NPSH)r m | Efficiency η % | Motor | ||
| m3/h | L/min | Power kw | Model | |||||
| 25×4-46 | 1.0 | 0.8 | 13 | 1450 | 4 | 62 | 0.75 | Y802-4 |
| 2.5 | 0.6 | 10 | 60.6 | 1.5 | Y90L-4 | |||
| 1.0 | 2.0 | 33 | 2900 | 4.5 | 59.4 | 1.5 | Y90S-2 | |
| 2.5 | 1.6 | 26 | 69 | 3 | Y100L-2 | |||
| 30×4-46 | 1.0 | 1.6 | 26 | 1450 | 4.5 | 63.5 | 1.1 | Y90S-4 |
| 2.5 | 1.2 | 20 | 61 | 2.2 | Y100L1-4 | |||
| 1.0 | 3.6 | 60 | 2900 | 5 | 60 | 2.2 | Y90L-2 | |
| 2.5 | 3.2 | 53 | 69 | 4 | Y112M-2 | |||
| 36×4-46 | 1.0 | 2.8 | 46 | 1450 | 4.5 | 66 | 2.2 | Y100L1-4 |
| 2.5 | 2.4 | 40 | 66.5 | 4 | Y112M-4 | |||
| 1.0 | 6.5 | 108 | 2900 | 5 | 60.5 | 4 | Y112M-2 | |
| 2.5 | 6 | 100 | 72 | 7.5 | Y132S2-2 | |||
| 42×4-46 | 1.0 | 4.8 | 80 | 1450 | 5 | 62 | 4 | Y112M-4 |
| 2.5 | 4.2 | 70 | 73 | 5.5 | Y132S1-4 | |||
| 1.0 | 10.5 | 175 | 2900 | 5.5 | 61 | 5.5 | Y132S1-2 | |
| 2.5 | 10 | 166 | 72 | 15 | Y160M2-2 | |||
| 45×4-46 | 1.0 | 6.3 | 106 | 1450 | 5 | 70 | 3 | Y100L2-4 |
| 2.5 | 5.9 | 99 | 74 | 7.5 | Y132M-4 | |||
| 1.0 | 13.5 | 225 | 2900 | 5.5 | 60 | 7.5 | Y132S2-2 | |
| 2.5 | 13 | 217 | 75 | 15 | Y160M2-2 | |||
| 60×4-46 | 1.0 | 15.5 | 255 | 1450 | 5 | 71.3 | 11 | Y160M-4 |
| 2.5 | 14.5 | 245 | 74 | 15 | Y160L-4 | |||
| 1.0 | 32 | 533 | 2900 | 5.5 | 63 | 18.5 | Y160L-2 | |
| 2.5 | 31.5 | 525 | 77 | 37 | Y200L2-2 | |||
| 70×2-46 | 0.6 | 24 | 400 | 1450 | 5 | 71 | 7.5 | Y132M-4 |
| 1.0 | 23.5 | 390 | 75 | 11 | Y160M-4 | |||
| 1.6 | 22.5 | 370 | 76 | 15 | Y160L-4 | |||
| 70×4-46 | 1.0 | 24.5 | 408 | 1450 | 5 | 72.5 | 18.5 | Y180M-4 |
| 2.5 | 23.5 | 392 | 79 | 30 | Y200L-4 | |||
| 80×2-46 | 0.6 | 36.5 | 608 | 1450 | 5 | 72 | 11 | Y160M-4 |
| 1.0 | 35 | 594 | 75.5 | 18.5 | Y180M-4 | |||
| 1.6 | 34.5 | 575 | 76.5 | 22 | Y180L-4 | |||
| 80×4-46 | 1.0 | 37 | 617 | 1450 | 5.5 | 72 | 30 | Y200L-4 |
| 2.5 | 35 | 590 | 78.1 | 45 | Y225M-4 | |||
| 100×2-46 | 0.6 | 72.5 | 1208 | 1450 | 5 | 73 | 22 | Y180L-4 |
| 1.0 | 71 | 1183 | 77 | 37 | Y225S-4 | |||
| 1.6 | 60.5 | 1158 | 79 | 45 | Y225M-4 | |||
| 100×4-46 | 1.0 | 72.5 | 1208 | 1450 | 5.5 | 73 | 55 | Y250M-4 |
| 2.5 | 70 | 1165 | 78.5 | 75 | Y280S-4 | |||
| S100×3-27 | 0.6 | 72 | 1196 | 1450 | 6 | 62 | 22 | Y180L-4 |
| 1.6 | 70 | 1160 | 72 | 55 | Y250M-4 | |||
| 2.5 | 69 | 1145 | 74 | 75 | Y280S-4 | |||
| S120×3-27 | 0.8 | 123 | 2055 | 1450 | 6 | 74.5 | 55 | Y250M-4 |
| 1.5 | 120 | 2010 | 76 | 90 | Y280M-4 | |||
| 2.5 | 115 | 1920 | 78.5 | 132 | Y315M-4 | |||