BW Bitumen/Asphalt Heat Insulating Gear Pump

Performance Range:

Capacity: 1-58 M3/H
Pressure: 0.36-0.8 Mpa
Temperature: Below 200 C
Motor Power: 1.1-22 Kw
Diameter: 16-100 Mm
Voltage: 3 Phase/380 V/50 Hz
Explosion-Proof Grade: IP 55
Insulation Class: F

Product Description
BWCB series asphalt pump structure forms: BW series asphalt pump's body with hollow sandwich, and is Equipped with inlet flange and outlet flange, can be used for heat conduction oil, steam, hot water and Other media to heat, insulation and cooling liquid and pump.

Application:
BWCB series asphalt pump is applicable to transport non-corrosive, not containing solid particles, at normal temperature have coagulability medium, especially Suitable for cold area outdoor installation and medium need insulation occasions during process, medium Temperature can reach 250 C, the viscosity is 5-1500 CST.


Advantage
1. Steady delivery without pulsation, little vibration and noise.
2. Out standing self-priming ability.
3. The pump can deliver the varied corrosion mediums if the proper material of parts selected in addition, the working temperature can reach 200 deg C.
4. The same rotary direction of internal rotor and outside rotor results in little wear and long operation life.
5. The pump's flow can be changed through adjusting the speed.
6. It's specially suited to deliver high viscosity medium.


Other model: