Cast Steel Motor Drive External Gear Pump For asphalt
Product Description
>>>Brief Introduction
YCB-G series cast steel heat insulating external gear pump is used to transfer different medium, such as heavy oil, asphalt, resin, detergent and glue, which not includes solid particles and the temperature not higher than 300ºC, with solidifying character under the normal temperature. It also applies to the site with heat insulated requirement in the process technology and outdoors installation at very cold area.
This series of heat insulating gear pump belongs to external gear pump. The tooth form is composite formed by arc and sine Curve. It could transfer many kinds of medium with steady output flow and pressure. There are heat insulating jacket and inlet and outlet joints. on the pump casing, so it could adopt the media, such as heat-conducing oil, steam, hot water and cold water to heat, keep warm and cooling the trandferred medium and pump. When the viscosity of transferred medium is larger than 1500cst, speed should be reduced.
>>>YCB-G all model with detail informaiton:
| Model | Port (mm) | Capacity (m3/h) | Different Pressure (Mpa) | Speed (r/min) | Motor Power (KW) |
| YCB0.6-0.6G | 25 | 0.6 | 0.6 | 910 | 0.75 |
| YCB1.6-0.6G | 32 | 1.6 | 910 | 0.75 | |
| YCB3.3-0.6G | 40 | 3.3 | 940 | 1.5 | |
| YCB4-0.6G | 50 | 4 | 940 | 1.5 | |
| YCB8-0.6G | 65 | 8 | 960 | 3 | |
| YCB10-0.6G | 65 | 10 | 970 | 4 | |
| YCB20-0.6G | 80 | 20 | 970 | 7.5 | |
| YCB25-0.6G | 80 | 25 | 970 | 11 | |
| YCB30-0.6G | 100 | 30 | 970 | 11 | |
| YCB40-0.6G | 125 | 40 | 970 | 15 | |
| YCB50-0.6G | 125 | 50 | 970 | 22 |