English
 |
YCB-10/0.6G
HOFFWELL
84136029
>>>Brief Introduction
YCB-G heavy duty external gear pump is used to transfer different medium, such as heavy oil,asphalt,resin, detergent and glue, which not includes solid particles and the temperature not higher than 300ºC, with solidifying character under thr normal temperature. It also applies to the site with heat insulated requirement in the process technolory and outdoors installation at very cold area.
>>>Pump Structure
The tooth form is composite formed by arc and sine Curve. It could transfer many kinds of medium with steady output flow and pressure. There are heat insulating jacket and inlet and outlet joints. on the pump casing, so it could adopt the media, such as heat-conducting oil, stead, hot water and cold water to heat,keep warm and cooling the transferred medium and pump. When the viscosity of transfer medium is larger than 1500cst, speed should be reduced.
>>>Pump Material:
Pump body is cast steel
Gear is cast steel
Shaft is 45# steel
Seal is packing seal in PTFE
>>>Pump models with specifications:
| Model | Port (mm) | Capacity (m3/h) | Different Pressure (Mpa) | Speed (r/min) | Motor Power (KW) |
| YCB0.6-0.6G | 25 | 0.6 | 0.6 | 910 | 0.75 |
| YCB1.6-0.6G | 32 | 1.6 | 910 | 0.75 | |
| YCB3.3-0.6G | 40 | 3.3 | 940 | 1.5 | |
| YCB4-0.6G | 50 | 4 | 940 | 1.5 | |
| YCB8-0.6G | 65 | 8 | 960 | 3 | |
| YCB10-0.6G | 65 | 10 | 970 | 4 | |
| YCB20-0.6G | 80 | 20 | 970 | 7.5 | |
| YCB25-0.6G | 80 | 25 | 970 | 11 | |
| YCB30-0.6G | 100 | 30 | 970 | 11 | |
| YCB40-0.6G | 125 | 40 | 970 | 15 | |
| YCB50-0.6G | 125 | 50 | 970 | 22 |
>>>Brief Introduction
YCB-G heavy duty external gear pump is used to transfer different medium, such as heavy oil,asphalt,resin, detergent and glue, which not includes solid particles and the temperature not higher than 300ºC, with solidifying character under thr normal temperature. It also applies to the site with heat insulated requirement in the process technolory and outdoors installation at very cold area.
>>>Pump Structure
The tooth form is composite formed by arc and sine Curve. It could transfer many kinds of medium with steady output flow and pressure. There are heat insulating jacket and inlet and outlet joints. on the pump casing, so it could adopt the media, such as heat-conducting oil, stead, hot water and cold water to heat,keep warm and cooling the transferred medium and pump. When the viscosity of transfer medium is larger than 1500cst, speed should be reduced.
>>>Pump Material:
Pump body is cast steel
Gear is cast steel
Shaft is 45# steel
Seal is packing seal in PTFE
>>>Pump models with specifications:
| Model | Port (mm) | Capacity (m3/h) | Different Pressure (Mpa) | Speed (r/min) | Motor Power (KW) |
| YCB0.6-0.6G | 25 | 0.6 | 0.6 | 910 | 0.75 |
| YCB1.6-0.6G | 32 | 1.6 | 910 | 0.75 | |
| YCB3.3-0.6G | 40 | 3.3 | 940 | 1.5 | |
| YCB4-0.6G | 50 | 4 | 940 | 1.5 | |
| YCB8-0.6G | 65 | 8 | 960 | 3 | |
| YCB10-0.6G | 65 | 10 | 970 | 4 | |
| YCB20-0.6G | 80 | 20 | 970 | 7.5 | |
| YCB25-0.6G | 80 | 25 | 970 | 11 | |
| YCB30-0.6G | 100 | 30 | 970 | 11 | |
| YCB40-0.6G | 125 | 40 | 970 | 15 | |
| YCB50-0.6G | 125 | 50 | 970 | 22 |
